Oster POWER LINE Classic 76 Hair Clipper # 76076-040

Oster POWER LINE Classic 76 Hair Clipper # 76076-040
Oster POWER LINE Classic 76 Hair Clipper # 76076-040

Designed for continuous professional use, the Power Line delivers the power you need, yet stays quiet and cool while running. The Salon Textured System created to be the fastest and most efficient hair cutting system available today.

Kit includes:
  • professional clipper with universal motor
  • Size 1 and size 00000 (micro-close) blades
  • Blade guard
  • Clipper grease
  • Lubricating oil
  • Cleaning brush
  • Instructions

    OPERATING INSTRUCTIONS: Use on voltage specified on appliance, A.C. Or D.C. all cycles. This appliance has bee made with extreme care. It has been thoroughly tested and inspected at every stage of its manufacture and assembly. As with most precision instruments, tat last polish on the running parts which bear upon each other comes only after a period of "breaking in" - in this case 4 to 6 weeks. If the speed of the motor varies (indicated by a change in its sound), it is normally the result of a change in the position of the appliance or a fluctuation in your line of voltage. When the appliance is lubricated in accordance with instructions, it will deliver ample power and speed for professional haircutting requirements.


    LUBRICATING MOTOR: For clippers with Oiler- oil only if motor develops a "squeal" to a dry bearing. Add only one drop of lightweight non-detergent motor oil into ball type bearing oilers. MORE OIL IS HARMFUL. Do not use a detergent oil. It drives the oil out of teh bearing and does not provide edequate lubrication. Use Oster Premium Lubricating Oil.

    GREASING: Over-greasing can cause leakage and reduce the operating efficiency of the clipper. Check once month by removing metal nameplate. Then remove nylon lever, metal link, and gear. Insert grease tube nozzle into hole on top of Gear post.

    OILING AND CLEANING BLADES: Apply Oster Premium Lubricating oil to blades several times daily to maintain a light film of oil on mating faces of the blades and tension spring guide. To clean, turn appliance on and submerge the cutting blades and tension spring guide. To clean, turn appliance on and submerge the cutting blades in Oster Blade Wash cleaner. Wipe the outside surfaces of the blade with a dry, clean cloth and begin clipping again. If after cleaning with Oster Blade wash cleaner, your blade still does not cut properly, it is possible that a very fine hair did not wash out from the clipper. Without loosening tension springs screws, slidet he upper blade to one side, but not completely out from under the tension spring, and wipe the mating surface clean. Place a drop of oil on the mating surfaes and in the tension spring guide slot. Slide upper balde to the other side and repeat process. Slide the upper blade back into position and reassemble the clipper. With the clipper running, lubricate the blade with a light coat of Oster Kool-Lube lubricant or a drop or two of Oster Premium Lubriacting oil.

    MAINTENANCE AND STORAGE: Any other maintenance not explained inthis manual should be performed by an AUthorized Service center. To Store unit, coil and secure cord and place in original carton.

    SERVICING OF A DOUBLE INSULATED APPLIANCE: In a double insulated appliance, two system of insulation are provided instead of grounding. No grounding means is provided on a double-insulated appliance, nor should a means for grounding be added. Servicing a double-insulated appliance requires extreme care and knowledge of the system and should b