Babyliss Pro GT Gold Titanium Magnetic Motor Clipper - BG684
|Babyliss Pro GT Gold Titanium Magnetic Motor Clipper - BG684|
OPERATING INSTRUCTIONS: This appliance is used on alternating current 120V 60 hertz only. To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in the polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. Do not attempt to defeat this safety feature. Remove the plastic head guard protectiong the balde. Apply oil across the blades; wipe off any excess with a dry cloth. Plug the clipper into electrical outlet; operate on voltage specified for clipper. Push the on/off switch to the on position. When finish cutting hair, remove trimmings from the blades using the cleaning brush. Wipe the housing clean with a dry cloth. Before repalcing head guard, apply a few drops of lubricating oil to the baldes to prevent any rust from occuring. This quality haircutting intrument has been manufactured with extreme care. It has been thoroughly tested and inpected before reaching the professional user. As with all precision instruments, there may be a period of breaking in. If the speed of the motor caries (as indicated by a change in sound or pitch), it is an indication of a change in position of the clipper or a fluctuation in line voltage. When the clipper is lubricated in accordnace with instructions, it will deliver ample power and speed for professional haircutting requirements.
USER-MAINTENANCE INSTRUCTIONS: Always apply oil to the blade before, during and after use. This will ensure maximum cutting performance. HOld clipper away from your body in a downward position, and apply oil on the front and sides of the cutter blade. Wipe off excess oil with a soft dry cloth. Any other servicing should be performaed by an authorized service representative since the appliance has no other user-serviceable parts. The product is for commercial use. Do not pull, twist, or wrap line cord around appliance.
HOW TO USE COMB ATTACHMENTS: To use the comb attachments, turn the clipper to the off position. Slide the comb attachment onto the top of the clipper blade, and then pull away from the blade.
REPLACEMENT BLADE SET: To remove cutting comb and cutter only: turn the clipper to the off postion, facing away from you. With the cutting comb and cutter assembly in place, use the attached hex-spanner to loosen and remove the fastening screws from the cutting comb (save the screws). Remove the cutting comb and lift the utter from the black plastic oscillating head. To replace cutting comb and cutter after removal for cleaning, replacement or because they are out of alignment, slide the cutter back to the black plastic oscillating head. Next, you must make sure that the cutter (small blade) and the cutting comb (large blade) are properly aligned. Line up the new or existing cutting comb with the two screw holes. Place the
|Similar items of Babyliss Pro GT Gold Titanium Magnetic Motor Clipper that you may like:|
Babyliss Pro GT Gold Titanium Trimmer - BG59
Babyliss Pro NANO TITANIUM 1 1/4inch Flat Iron combo pack - BABNTPP7
Babyliss Pro FORFEX Mini Professional Trimmer Clipper # FX785CB
Babyliss Pro Diamond Titanium Ionic Hair Dryer - BABDTB5586
Print Share Share Digg This