|Home > Shop by Brand Name > Hair Care Tools and Hair Supplies > Andis > |
Home > Shop by Brand Name > Hair Care Tools and Hair Supplies > Andis > Hair and Salon Tools > Hair Clipper >
Home > Hair and Salon Tools > Hair Clipper >
Andis CERAMIC BGRC Pro Detachable Blade Clipper - # 63965
|Andis Ceramic BGRc Professional Detachable Blade Clipper|
20% lighter, 10% smaller
Powerful, rotary motor clipper with detachable blades for heavy-duty use
Includes CeramicEdge #1 and #000 Blades
Works with all Andis UltraEdge and CeramicEdge blades (sold separately)
Also compatible with Oster 76 Blades
Detachable blade clipper for easy changing, cleaning and style versatility
Convery to a cordless clipper by using BGR+ battery pack and SensaCharge ( sold separately)
Andis experts recommend starting your blade collection with these six esssential CeramicEdge blades. (#1 and #000 included)
Congratulations! You just went first class when you bought this Andis appliance. Careful workmanship and quality design have been hallmarks of Andis products since 1922.
Please read the following instructions before using your new Andis clipper. Give it the care that a fine precision built instrument deserves and it will give you years of service. Before starting your clipper, remove the balde guard (some models may not have a blade guard). Plug cord into electrical outlet, operate 120 volts, 60 cycle AC electrical current or as noted on unit. To start clipper, move switch button to on position; to stop, move switch button back to original position. After using your Andis Clipper, rewrap cord and store in a safe place.
REMOVING BLADE SET:
To remove blade set, first make sure you clipper motor is switched off, then push down on balde with both thumbs (Diagram A) and slide blade off blade hinge. If your blade hinge should snap closed and is flush with the cliper, use a small standard screwdriver to pry the tongue of the hinge out (Diagram B). NOTE: Hair may accumulate in the front cavity of the housing under the blade. If this happens, you can clean out the hair by brushing out the cavity with a small brush or an old toothbrush while the blade is off the clipper (see Diagram B for location of cavity being referenced).
REPLACING OR CHANGING BLADE SET:
To replace or change your blade set, slide the blade breacket onto the hinge of the clipper (Diagram C) and with the clipper turned on, push position.
The internal mechanism of your motor clipper has been permanently lubricated in this manual, no other maintenance should be performed, except by Andis company or an Andis Authorized repair service station.
CARE AND SERVICING OR YOUR ANDIS CLIPPER BLADES:
Blades shold be oiled before, during, and after use. If your clipper blades leave streaks or slow down, it's sure sign blades need oil. Pleace a few drop of Andis clipper oil on teh front and side of the cutter blades (Diagram D). Wipe excess oil off blades with a soft, dry cloth. Spray lubricants contain insufficients oil for good lubrication, but is an excellent clipper blade coolant. Always replace broken or nicked blades to prevent injury. You can clean teh excess hair from your blades by using a small brush or worn out toothbrush. To clean the blades, we suggest to immerse the blades only into a shallow pan of andis clipper oil, while the clipper is running, Any excess hair and dirt that has accumulated between the blades should come out. After cleaning, turn your clipper off and dry blades with a clean dry cloth and start clipping again. If upon cleaning your blades you find that the blades will still not cut, there may be a few fine pieces of hair trapped between the upper and lower blade. If this happens, you will need to snap the blade off the clipper. P
|Similar items of Andis CERAMIC BGRC Pro Detachable Blade Clipper that you may like:|
Andis BLADE set for Improved Master clipper - #28 - # 01513
Andis BLADE set for Improved Master clipper - #22 - item # 01556
Andis CERAMIC Advanced Clipper - #21490
Andis BLADE set for FADE MASTER clipper - item # 01591
Print Share Share Digg This